The advantages and installation of the sensor

　　With the development of science and technology, the shortcomings of sensors, such as susceptibility to interference, have been continuously overcome with the development and progress of science and technology, and their accuracy has been greatly improved. Nowadays, the development of sensors is relatively mature. Now let us take a look at what advantages it has?

　　The sensor does not have very strict requirements for the working environment in which it is located, and it can adapt to the harsh environment very well, and the working environment is very wide. From hot areas to severe cold areas, even in the open air environment, normal work can be carried out. It can adapt well to the humid and corrosive environment, as well as the environment containing polluted gas. At the same time, its ability to resist noise is also very strong.

　　In the case of many advantages, its price is not high, it can be produced in large quantities, and its cost performance is very high. And it has high requirements for processing equipment, so there will be no errors or quality problems due to manual operations.

　　Its working stability is also very strong, and the detection accuracy is also very high, so it is widely used in some fields that have strict requirements on products, such as military, aerospace and other fields.

　　At the same time, its sensitivity is also very high, it can accurately perceive the information being measured, and can realize automatic detection and automatic control with high accuracy.

　　And its accuracy is also inseparable from the installation. When installing, it should be surrounded by as many baffles as possible to cover it, and even a metal plate with a small thickness can be used to cover it, so as to prevent dust without affecting its measurement accuracy. Impurities such as sundries contaminate the sensor or some important parts of it, preventing it from affecting the accuracy of its measurement and causing errors, resulting in result 3 inaccuracy. At the same time, calibration can be done before the start of its work, so as to avoid errors in its work due to its errors. The calibration of the sensor can greatly reduce its error, and achieve its measurement purpose more flexibly through the actual accurate value.

Read recommendations:

Magnetizing Inrush Current Limiting in NTC Switch Mode Power Supplies (SMPS).Infrared sensing module

HNB electronic cigarette and dehumidifier with NTC temperature sensor.Infrared digital sensor module

Φ5mm size

Diameter 3mm size

HW 802