How to properly install the ntc temperature protector.Human Body Temperature Monitoring Sensor

　　Nowadays, temperature control switches are widely used in our lives. Different models and sizes of temperature control switch products have different prices. The temperature protector plays a role in protecting the safety of electrical appliances in the temperature control system. Therefore, the temperature Proper installation and use of the protector is important. So, what should be paid attention to in the use of the specific temperature protector? Now the Henghao temperature control switch manufacturer will explain the details to you.

　　The key points of using the temperature control switch correctly

　　1. When using contact temperature-sensing installation, the product should be close to the installation surface of the controlled appliance.

　　2. Do not collapse or deform the plastic or metal shell during installation, so as not to affect the performance.

　　3. For metal shell products with insulating jackets, do not remove the additional insulating jackets or crush them during installation to avoid leakage and ensure safe use.

　　4. If the product is used in a circuit with a current of no more than 5A, the copper core cross-section should be selected to be 0.4-0.75mm2 to connect it.

　　5. The product should be stored in a place where the relative humidity is less than 90% and the ambient temperature is below 40°C, which is ventilated, clean, dry and free of corrosive gases.

Read recommendations:

How to use radio frequency ranging sensor to monitor the water level of manhole.Microwave Radar Sens

NTC thermist resistance thermal heating pile suitable for the rapid reaction of the forehead warm gu

Z007

HW-XC511 Micorwave sensor module

HW-HB100 microwave sensor module