The main purpose of ntc thermistor.Radar Microwave Induction Sensor Switch

　　In simple terms, NTC thermistor refers to a negative temperature coefficient thermistor, which is a type of sensor resistor whose resistance value decreases with increasing temperature. It is made of metal oxides such as manganese, cobalt, nickel and copper as the main materials and is manufactured by ceramic technology. These metal oxide materials all have semiconducting properties because they are completely similar to semiconductor materials such as germanium and silicon in electrical conductivity. The following mainly introduces the use method and purpose of ntc thermistor in the circuit.

　　When NTC is used for temperature detection, monitoring or compensation, it is usually necessary to connect a resistor in series. The choice of resistance value can be determined according to the temperature area that needs to be detected and the amount of current flowing. Generally, a resistor at room temperature is connected in series with the NTC. Resistors with the same value, and ensure that the flowing current is small enough to avoid self-heating and affect the detection accuracy. The detected signal is the partial pressure on the NTC resistor. If you want to get a more linear curve of partial pressure and temperature,

Read recommendations:

What should I pay attention to when buying NTC thermistor?Radar Sensor Switch

NTC Temperature Control Probes for Wall Breakers.Traffic lens Processing

PIR Lens 7803

PIR Lens 7805

MF51 103F3950FL80 NTC Thermistor