New Energy Vehicle Charging Station and NTC Temperature Sensor.infrared sensor switch

　　With the rapid development of new energy vehicles, new energy charging stations will be installed in public buildings (such as public buildings, shopping malls, public parking lots, etc.) and residential parking lots or charging stations, which can charge various types of electric vehicles according to different voltage levels.

　　The charging station of new energy vehicles generally provides two charging methods: conventional charging and fast charging. In order to solve the heating problem of the charging station of new energy vehicles, an NTC temperature sensor is installed on the charging station equipment to detect temperature. When the temperature reaches the set value, the power supply will stop charging, preventing faults caused by heating during charging, thus better protecting the safety performance of the car.

　　The following is an introduction to the NTC temperature sensor of the new energy vehicle charging station:

　　Parameter characteristics:

　　1. Resistance: R25=10K Ω ± 1% B (25/50)=4150K ± 1%

　　2. Thermal reaction time: ≤ 16 seconds in a water bath

　　3. Voltage withstand test: AC 1800V 2mA for 1 second

　　4. Insulation test: DC 500V 100M Ω

　　5. Rated power: ≤ 10mW

　　6. Operating temperature: -40 ℃~125 ℃

Read recommendations:

SFP High Return Loss Receiving Scheme Improves Transmission Performance of 10G LTE Optical Modules

The main features of thermistors.Microwave Sensor Module

HW-XC509 microwave sensor module

10.525G 18m distance HW-RB10 millimeter wave radar sensor module

PND103F3950FTR311