NTC sensor for monitoring temperature in gas field

　　A gas plant is a power plant that converts the high-temperature spent flue gas discharged from the gas turbine to steam through the waste heat boiler, and then injects the steam into the steam turbine to generate electricity. Its main features are energy saving and cleanliness.

　　The working principle of the gas plant is that the impeller compressor absorbs air from the outside, compresses it and sends it to the combustion chamber, and at the same time, the fuel (gas or liquid fuel) is also injected into the combustion chamber to be mixed with high-temperature compressed air, and burned under constant pressure. The generated high-temperature and high-pressure flue gas enters the gas turbine for expansion work, which drives the power blades to rotate at a high speed, and the exhaust gas is discharged into the atmosphere or reused.

　　It can be seen that the NTC sensor for monitoring the temperature of the gas plant is very important.

　　Features:

　　Good consistency and interchangeability

　　High precision of resistance value and B value

　　High sensitivity and quick response

　　Good stability and high reliability

　　Diverse styles, adapt to a variety of joints

　　Using double-layer sealing process, it has good insulation sealing and anti-mechanical impact and anti-bending ability

　　Product parameters:

　　Thermal Time Constant (S): 5-20

　　Dissipation coefficient (mW/℃): 2-4

　　Rated power (mW): 10-20

Read recommendations:

Three control states of ntc temperature control switch

NTC thermistor sensor used in intelligent thermostatic cup.Infrared digital sensor module

PIR Lens 0512H

Z003

HW-XC510 Microwave sensor module