Matters needing attention when using ntc temperature control switch

　　With the wide application of temperature control switches, various types and sizes of temperature control switch products meet the needs of different prices. In order to protect the safety of electrical appliances, the installation and use of temperature protectors must follow the correct steps. So what should we pay attention to when using the temperature protector? Now let Henghao temperature control switch manufacturers explain the details for you.

　　1. When using contact temperature-sensing installation, the product should be close to the installation surface of the controlled appliance.

　　2. Do not collapse or deform the plastic or metal shell during installation, so as not to affect the performance.

　　3. For metal shell products with insulating jackets, do not remove the additional insulating jackets or crush them during installation to avoid leakage and ensure safe use.

　　4. If the product is used in a circuit with a current of no more than 5A, the copper core cross-section should be selected to be 0.4-0.75mm2 to connect it.

　　5. The product should be stored in a place where the relative humidity is less than 90% and the ambient temperature is below 40°C, which is ventilated, clean, dry and free of corrosive gases.

Read recommendations:

How RF technology works.20mm glass cap Photoresistor

Enameled wire NTC thermistor IQC quality test report.alarm sensor direct sales

8308-D PIR lens

MF5A 103F3950FL60 lacquered wire

PIR Lens 8604