Laser printer special NTC thermistor resistance

　　The laser printer uses carbon powder printed. The printed speed response is fast. The most important point is that the printing of the printing printer is much clearer. At the same time From time to time, heat will be generated to install NTC heat -sensitive resistance to detect the temperature of the roller shaft.

　　Our company specializes in the production of NTC thermistor, and the laser printer special NTC thermistor is the following MF58 NTC thermistor

　　The MF58 is similar to the shape of the diode D035, with axial tin -plated (copper nickel iron) line. Widely used in temperature measurement, detection, instructions, monitoring, measurement, control, calibration and compensation.

　　Product Size:

　　Features:

　　The response is fast and the sensitivity is high.

　　High stability

　　Small volume, sturdy, easy to install automatically

　　Can be used with automatic inserting device

　　Product specifications:

　　• Poor resistance ... ± 3%, ± 5%(R 25)

　　• Diversion ...

　　• Work temperature range ... -40 ℃ ~+ 300 ℃ (300) ℃

　　-40 ℃ ~+ 150 ℃ (150) ℃

　　• The heat dissipation constant ... Δ = 1.3MW /℃

　　• Hot time constant ...

　　• Maximum power consumption ... P = 357MW (maximum temperature 300 ℃)

　　P = 162MW (maximum temperature 150 ℃)

Read recommendations:

PIR sensor.Body Sensor Factory

NTC thermistor used on power bank.Infrared IC wholesaler

PIR Lens 8005-1

BISS0001

PND103F3950FTP707(705) NTC Thermistor 10K 1% 3950