KSD301 NTC temperature control switch installation method

　　KSD301 temperature control switch is a bimetal contact temperature-sensing temperature relay with a fully enclosed shell. It is a temperature control switch that uses a bimetallic sheet as a temperature sensing component. On the metal disc, when it reaches the action temperature setting, it moves quickly, and the contact is opened or closed through the action of the mechanism, so how do we install the KSD301 temperature control switch? Let's take a look with the temperature control switch manufacturers.

　　1. When using contact temperature-sensing installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the temperature-sensing effect, the temperature-sensing surface should be coated with thermal grease or other heat-conducting medium with similar performance.

　　2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.

　　3. Do not allow liquid to penetrate into the inside of the temperature controller, do not crack the shell, and do not arbitrarily change the shape of the external terminals.

　　4. When the product is used in a circuit with a current not greater than 5A, the copper core cross-section should be 0.5-1㎜2 wire connection; when the product is used in a circuit with a current not greater than 10A, the copper core cross-section should be 0.75-1.5㎜2 wire connection connect.

　　5. The product should be stored in a warehouse where the relative humidity is less than 90% and the ambient temperature is below 40°C, which is ventilated, clean, dry and free of corrosive gases.

Read recommendations:

The main purpose of ntc thermistor.Radar Microwave Induction Sensor Switch

NTC thermistor surge circuit analysis.Turkey PIR Lens

HW808

PIR Lens 8605-2A

TP-L80