1004,West-CBD,No.139 Binhe Rd,Futian District,Shenzhen, China Post Code:518048
+86-18682200597
sales@szhaiwang.com
source:Industry News release time:2023-09-14 Hits: Popular:Infrared sensing module
With the continuous improvement of the operation level of the power grid, power transformers have become one of the important and expensive equipment in the power system, and their reliability directly affects the safety, efficiency, and economic operation of the power grid. The end of the lifespan of most transformers is due to their loss of insulation capacity, and the main factor affecting insulation capacity is the winding temperature during transformer operation. If the winding temperature during transformer operation is too high, it will not only affect the service life of the transformer, but also pose a threat to the safe operation of the transformer. Therefore, it is necessary to monitor the temperature during the installation of NTC temperature sensors in the transformer.
The temperature monitoring device for electrical equipment is equipped with an NTC temperature sensor on the top of the box, which regulates the internal temperature of the transformer equipment through a temperature control mechanism to prevent excessive winding temperature during operation, prolong the service life of the transformer, and ensure its safe operation.
The temperature monitoring device for electrical equipment uses NTC temperature sensors, which use glass sealed thermistors. The glass shell encapsulates the thermistor chip inside, and one end of the two leads is connected to the thermistor chip, while the other end extends out of the glass shell as two pins; And the temperature sensor also includes a stainless steel shell and organic silicon sealing adhesive. The stainless steel shell is set outside the glass shell, which is sintered and connected to the glass shell through stainless steel sealing glass powder. The organic silicon sealing adhesive is sealed inside the stainless steel shell. This NTC temperature sensor has a sensitive response, fast temperature sensing speed, high temperature measurement accuracy, and can work normally in high-temperature environments for a long time. It is suitable for temperature monitoring devices in electrical equipment.
Read recommendations:
NTC thermistor for socket temperature control protection.Body Sensor Factory
Introduction and application of NTC thermistor.Radar Microwave Induction Sensor Switch
Popular Recommended Products
PIR Lens 8109
2021-12-0910.525G HW-MB07 millimeter wave radar sensor module
2023-03-04P914 Digital sensor
2021-12-09HW-MD6 microwave sensor module
2021-12-07PIR Lens 8731-1
2021-12-09PIR Lens 8603-5
2021-12-09PIR Lens 7805
2021-12-09Z009
2021-11-27PIR Lens 8605-2A
2021-12-09PND103F3950FTR310 NTC Thermistor 10K 1% 3950
2021-11-27PIR500B Analog sensor
2021-12-09Flexible film temperature sensor for Wearable technology.Infrared digital sensor
2023-06-13Electrical component symbols explanation
2022-05-19Waterproof NTC Thermistor
2022-08-25Solar water heater sensor water temperature NTC
2023-03-06Thermistor Calibration Method
2022-08-10Variable frequency air conditioning and NTC temperature sensor.Small Human Body Sensor
2023-08-17NTC for BMS
2022-11-18Discussion on the Function of NTC Temperature Sensor in Circuit Breakers.Small Human Body Sensor
2023-09-16NTC temperature sensor for electric massage chair.Human Body Sensor Vendor
2022-09-27Common NTC temperature sensors for measuring changes in human body temperature
2022-08-26szhaiwang4@hotmail.com
+86-18682200597
sales@szhaiwang.com