Precautions for lithium battery charging.NSP Type Power Thermistor

　　1. Carefully read the battery manual, use the recommended battery, and follow the operating procedures;

　　2. Check whether the contact parts of the electrical appliances and batteries are clean. If necessary, wipe them clean with a damp cloth, dry them, and then install them in the correct polarity direction;

　　3. When there is no adult supervision, do not let children replace the battery. Small batteries such as AAA should be placed in a place that children cannot reach;

　　4. Do not mix new, old batteries or batteries of different models, especially dry batteries and rechargeable batteries;

　　5. Do not attempt to regenerate the battery using heating, charging, or other methods to avoid danger;

　　6. Do not short-circuit the charging battery, as it may damage the battery and cause heat to burn.

　　7. Do not heat the battery or throw it into water or fire. Placing the battery in water will cause it to fail, and placing the battery in fire will cause it to rupture or

　　Intense chemical reactions can explode and injure people, or produce harmful gases and smoke.

　　8. Do not disassemble the battery or attempt to penetrate it with sharp tools, as the electrolyte inside the battery can harm skin and clothing.

　　9. After using the electrical appliance, the power switch should be disconnected to avoid ignition due to heating, etc;

　　10. The battery should be removed from electrical appliances that have not been used for a long time, emptied, and stored. And remove the charge and discharge every 3 months or so;

　　11. The battery should be stored in a cool and dry place, avoiding direct sunlight;

Read recommendations:

NTC weather resistance.Stage lens sales

NTC thermistor model for temperature detection on DJI batteries.Infrared IC Factory

PIR Lens 8090

Φ7mm size

PIR Lens 8761-1