1004,West-CBD,No.139 Binhe Rd,Futian District,Shenzhen, China Post Code:518048

+86-18682200597

sales@szhaiwang.com

  • About Us
    Company Profile Enterprise Honor Factory Environment Company Culture Development Path
  • Product
    Microwave Sensor Series PIR Sensor Series LDR Sensor and Light Sensor Thermistor Sensor Series Fresnel Lens Reminder Alarm Sensor
  • News
    Company News Industry News Latest News
  • Service
    FAQ Download
  • Contacts

    Home  -  News  -  Industry News

    NTC weather resistance.Stage lens sales

    source:Industry News release time:2022-06-13 Hits:     Popular:Infrared sensing module

      

      1. NTC sensor cold resistance

      ΔR/R25≤±3% Continuously placed in the air at the specified minimum operating temperature for a specified time. After the test, it was left to stand for 1 hour in a standard state, and then the measurement was performed.

      2. NTC probe heat resistance

      Continuously placed in the air at the specified maximum operating temperature for a specified time. After the test is completed, the measurement is carried out after standing in the standard state for 1 hour.

      3. Temperature Probe Temperature Cycling

      Within the operating temperature range, keep the specified minimum operating temperature, maximum operating temperature and normal temperature for the specified time respectively, and repeat the specified number of times. After the test, it was left to stand for 1 hour in a standard state, and then the measurement was performed.

      4. Thermal shock of temperature probe

      –20℃×30min→normal temperature×10min→100℃water×30min→normal temperature×10min, a total of 10 cycles back and forth, within the operating temperature range, keep the specified minimum operating temperature and maximum operating temperature for the specified time respectively, repeat the regulations frequency. After the test, it was left to stand for 1 hour in a standard state, and then the measurement was performed.

      5. Moisture resistance

      Place at the specified temperature and relative humidity for the specified time. After the test, it was left to stand for 1 hour in a standard state, and then the measurement was performed.

      6. NTC high temperature load

      Within the operating temperature range, at the specified maximum operating temperature, apply the specified electrical load and leave it for a specified time. After the test is completed, the measurement is carried out after standing in the standard state for 1 hour.


    Read recommendations:

    NTC temperature sensor for toilet sensing temperature.Radar Microwave Induction Sensor Switch

    NTC temperature sensor for electric heater

    PND103F3950FTP706 NTC Thermistor 10K 1% 3950

    Z005

    HW8002PIR sensor module

    Popular Recommended Products