Discussion on the Preparation Method of Temperature Sensors for Printers.infrared sensor switch

　　A temperature sensor refers to a sensor that can sense temperature and convert it into a usable output signal. Temperature sensors are the core part of temperature measurement instruments, with a wide variety of types and the ability to adapt to various working environments.

　　At present, temperature sensors used in office equipment such as printers and copiers are mostly imported thermosensitive sealing resistors. Therefore, it is of great significance to develop a high-performance glass sealing resistor to replace imported glass sealing resistors. The following is the preparation method of temperature sensors for printers developed by Aisheng:

　　1. Weld the glass sealed NTC thermistor onto the steel plate of the temperature sensor base;

　　2. Weld the wire onto the temperature sensor base;

　　3. Apply NTC thermistor and welded steel sheet with high-temperature adhesive film up and down;

　　4. Terminate the tail of the lead and insert the rubber connector to obtain the temperature sensor.

Read recommendations:

Bluetooth headset NTC circuit and applicable models

A temperature sensor refers to a sensor that can sense temperature and convert it into a usable outp

PIR Lens 7707-1

HW-N9MW microwave sensor module

Digital PIR Sensing Controller 3386