1004,West-CBD,No.139 Binhe Rd,Futian District,Shenzhen, China Post Code:518048
+86-18682200597
sales@szhaiwang.com
source:Industry News release time:2023-09-18 Hits: Popular:Infrared sensing module
The photovoltaic power generation system is composed of solar cell arrays, battery packs, charge and discharge controllers, inverters, AC distribution cabinets, solar tracking control systems, and other equipment. The inverter is a device that converts direct current into alternating current. Due to the fact that solar cells and batteries are DC power sources and loads are AC loads, inverters are essential. When the inverter is working, the surface temperature generated is relatively high, and it needs to be installed in a ventilated area for easy heat dissipation during installation. Therefore, it is necessary to install an NTC temperature sensor in the inverter cooling device to constantly monitor the temperature and provide feedback. When the NTC temperature sensor detects that the external temperature is too high, the drive mounting seat drives the heat dissipation cover to cover the inverter, and then uses the water-cooled and air-cooled heat dissipation mechanisms to carry out multi-level heat dissipation. This cools the inverter in high-temperature weather, reduces the surface temperature of the inverter, prevents overheating and accelerates losses, and effectively improves its service life.
A ground ring NCT temperature sensor, using a glass sealed NTC thermistor, has good waterproof and moisture-proof performance, will not be affected by external conditions, and can maintain optimal power generation performance and system reliability; The probe adopts a ground ring type with high sensitivity. It can effectively monitor the internal temperature of the inverter in real-time. If the temperature of the inverter is too high, it will burn out the internal components. Therefore, it is necessary to install a temperature sensor to reduce temperature faults caused by excessive temperature.
Read recommendations:
Tip sensitive bearing RTD temperature sensor.Human Body Sensor Light
Comparison of typical applications of circuit protection devices such as NTC, PTC, TVS, MOV, etc.Min
Popular Recommended Products
PIR Lens 0512H
2021-12-09HW1004PIR sensor module
2021-12-07Z003
2021-11-27PIR Lens 8002-2
2021-12-09PIR Lens 7709-2
2021-12-09MF51 103F3950FL45 NTC Thermistor
2021-11-27HW-11801630 Imaging Fresnel lens
2024-04-11HW-HB100 microwave sensor module
2021-12-07PIR Lens 8140
2021-12-09HW-16001000 Fresnel Linear Lens
2024-04-11HW-XC508 microwave sensor module
2021-12-07The increasingly popular radio frequency energy harvesting technology
2022-01-0710kntc thermal resistance!Human Body Infrared Temperature Sensor
2023-02-18Introduction to Body Sensors
2022-11-04New miniature FIR sensor
2022-10-24The difference between NTCKSD thermostat and NTCKST thermostat
2022-05-25Temperature sensor for BMS battery
2022-12-30NTC sensor for measuring body temperature in smart bracelet.infrared sensor lens Factory
2022-07-15NTC thermistor of milk heater applicable to NTC.Microwave Sensor Module Radar Sensor
2023-03-22Tadpoles -shaped small black head NTC 10K 1% B = 3435 L = 100mm
2023-02-15The main characteristics of thermistor resistance.Wide-Angle Fresnel Lens manufacturer
2023-05-23szhaiwang4@hotmail.com
+86-18682200597
sales@szhaiwang.com